A customer inquire about the high-voltage cable - Newheek X ray Cable

A customer inquire about the high-voltage cable

A customer called to consult the technical parameters of our company’s 75Kv high-voltage cable and asked for the price. Let me tell you some knowledge of high-voltage cable.
The high-voltage cable is connected to the high-voltage generator and the x-ray tube head in the large and medium-sized x-ray machine. The function is to send the high voltage output by the high voltage generator to the two poles of the x-ray tube, and send the heating voltage of the filament to the filament of the x-ray tube.
The structure of high-voltage cable: according to the arrangement of concentric lines, there are two types of coaxial (concentric circle) and non-coaxial (non-concentric circle)
Notes on using high-voltage cables:
Prevent excessive bending. The bending radius should not be less than 5-8 times the cable diameter to avoid cracks and reduce the insulation strength. Usually keep the cable dry and clean to avoid the erosion of oil, moisture and harmful gases, so as to avoid the aging of rubber.
After reading these, do you understand our company’s high-voltage cable knowledge? If you have a need, please contact us!