Normal X-Ray High Voltage Connector - Newheek X ray Cable

Normal X-Ray High Voltage Connector


Specs & Dimensions

Construction

1. HV Cable Connector Diagram             Normal X-Ray High Voltage Connector

claymount high voltage cable

2. Plug Body Section Plan Diagram             Normal X-Ray High Voltage Connector

china x ray high voltage cable assemblies

Specification

Table 1: HV Cable Plug Body Spec. Refer to Plug Section Plan Diagram

china hv cable x ray equipment

Table 2: Other

china x ray equipment hv cable connector

Technical Requirement

Cable sheath appearance should be smooth, uniform diameter, with no joint, bubble, bumps and other undesirable phenomena.
Weave shield density is not less than 90%.
The minimum thickness of the cable insulation and sheath must be 85% more than the nominal thickness.
Insulation between the core and the insulated wire, insulation between the core and the ground cable should be able to withstand the AC 1.5KV and keep 10 minutes can not been broken down.
Insulation between the core and the shield should be able to withstand the DC 90 KV and keep 15 minutes can not been broken down.
The DC resistance of the conductor and ground cable not more than 11.4 + 5%Ω/m.
The insulation resistance of the insulation core wire not less than 1000MΩ·Km.
The plug body should be able to withstand not less than 1000 times fallen off experiments with no damage.
The surface of each plating should be clean and bright.
The cable and each part should meet Rohs 3.0 relative requirement. Brass is below 0.1wt.
The cable and each part should meet Reach relative requirement.

Use Conditions

When the high voltage cable is used, the bending radius should not less than 66mm.
The high voltage cable using temperature: -40℃~70℃.
The high voltage cable rated voltage: 75KVdc

 
 
Certificate EMC
 
only cable

 
Certificate ROHS
 
x ray equipment hv cable manufacturers

Can you provide the sample test?

Yes, of course. In order to ensure our product meet your quality or other detail requirement, we would like to offer you one free sample for test.

What is the delivery time?

Normally 15 days. We are glad that you can tell us more information about what you need. Then check the date of manufacturing in factory.

What is the payment term you use?

Mainly we use 100%T/T before delivery. Other payment terms please let us know.

Can you make HV cables as customer requirements? Can you make OEM HV cables?

Yes, of course. We can make the specification as you need. OEM HV cables is also available. We can print your brand name on HV cables.


(+86) 18953613955
service@newheek.com