The 2 meters high voltage cable is used to connect the high voltage generator and the X-ray tube for conveying high voltage.However, some precautions should be taken when using high voltage cables. And high voltage cable repair and maintenance.

The cable of 2 meters high voltage is often twisted in use, so it is easy to be broken down and damaged, and difficult to be mastered for repair.
Newheek summarized some methods to repair the high voltage cable connector and prevent the damage of HV cable in the future:
Do not use a knife to cut excess insulation rubber, so as not to cause knife injuries.In order to prevent metal particles from invading the insulation rubber layer and causing high voltage static electricity, it is necessary to break through the rubber layer of high voltage cable and cable plug.
During maintenance, a steel bushing can be added to the upper end of the plug socket to reduce the breakdown damage caused by bending of the cable root.It is better to hang the 2 meters high voltage cable to avoid damp and mildew.
Newheek 2 meters high voltage cable is mainly divided into 75 KV and 90 KV, which can be applied to different X-ray machines respectively.
Newheek also provides quality testing for your 2 meters high voltage cable.