Improper use and overvoltage use easily lead to high voltage cable breakdown. The breakdown rate of the high voltage cable at the end of the pipe is high, the main reason is that the high voltage cable reservation length is insufficie.........

The peeling and cleaning of the high voltage cable head. The outer semiconductor layer is stripped too much and can not be inserted into the high voltage cable head. when filling. The oil on the head of the cable peeled before fillin.........

The production technology of the high voltage cable head . The welding technology is unskilled, which makes the metal mesh and the metal mouth of the cable head long welding, which causes the partial temperature of the insulating lay.........

The proportion of the filling agent is improper. The most commonly used filler is the rosin plus transformer oil (If the epoxy tree ester is used as the filler, the high voltage cable connector can not be reused). The proportion of t.........

The quality of the high voltage cable is poor. Some small X-ray machine manufacturers are mostly small factories built earlier. There are many quality problems in the high-voltage cables used, which is one of the main causes of breakd.........

High voltage cable failure High voltage cable may cause breakage, short circuit and high voltage breakdown. High voltage cable fault is the most common breakdown of main insulation layer. Once this fault occurs, it causes little X-ra.........

Terminology of high voltage cable 1、    Plug and socket: a plug-in that can easily connect high-voltage cables used on medical X ray equipment to high-voltage generators and X ray tube components. It includes two parts. A    Plug :.........

Attention to the use of high voltage cables: Prevent over bending of high voltage cable. The bending radius of the high voltage cable should not be less than 5-8 times the diameter of the high voltage cable, so as to avoid the crack.........

Introduction of the components of high voltage cable                                                                                            —— Part Five Protective Layer . The outer, made of plastic with more, think useful black.........

Introduction of the components of high voltage cable                                                                                           ——Part Four Metal Shielding Layer With a diameter of not more than 0.3 tinned copper wi.........