Recently many customers have called to inquire about high-voltage cables, let us share with you our 75KV and 90KV high voltage cables.
75KV high-voltage cable is mainly used to connect 125KV tube voltage ball tube and generator, 90KV high-voltage cable is used for 150KV tube voltage ball tube and generator.
High-voltage cable configuration connector is a three-hole plug, installation should pay attention to the corresponding position of the three holes, three holes were marked C (public side), S (small focus), L (large focus), the correct position is when the jack face themselves, C hole is located above, S hole is located on the left, L hole is located on the right, if the installation error will affect the normal use of the cable oh.
In addition, it is recommended that the use of silicone grease injection insulation in the joint, filling the gap, can reduce the high voltage to shell discharge, extend the service life of high-voltage cable.
If you have other questions about the high-voltage cable, you can contact us!