Fault analysis of 2m high voltage cable - Newheek X ray Cable

Fault analysis of 2m high voltage cable

2m high voltage cable, high-pressure fuel tank and X-ray tube are three important components of the high pressure part of X-ray machine. High-voltage fault maintenance is the maintenance of these three components.The circuit of the high-pressure part is not complicated, but the process is complicated, and the high-pressure components are all sealed, which is inconvenient to open detection directly.
After opening, the packaging needs special equipment. The high-voltage fault shows that different machine faults have different performances, so the following phenomenon should be considered as the fault of 2m high voltage cable.
First of all, the breakdown of 2m high voltage cable itself mainly occurs in the repeated bending of 2m high voltage cable. The other is high-voltage plug breakdown.The third is the opening of 2m high voltage cable conductor, which occurs at the welding place of cable conductor and high-voltage plug.The reason for the failure is that the high voltage of the machine exceeds the voltage of the cable.Production quality, cable core cable to see the road more quality issues.Due to the repeated movement of the ball tube during the use of the machine, the end of 2m high voltage cable is repeatedly bent, making the bending performance worse.
Properties of insulating materials.
In this regard, Newheek 2m high voltage cable can provide fault detection service for you. One is offline detection, use insulation tester (shake table) to measure insulation resistance, use multimeter to measure lead on and off.The other is replacement test, with a pair of new cable replacement test.
Newheek 2m high voltage cable can meet your different requirements.
2m high voltage cable