The high tension cable 6mt is an important part of the X-ray machine. The high pressure part of X-ray machine mainly refers to the three components of high tension cable 6mt, high pressure oil tank and ball tube.
In many cases, the X-ray machine fails, and the high pressure part is the first to be checked.High-voltage fault maintenance is the maintenance of these three components. The circuit of the high-pressure part is not complicated, but the process is complicated, and the high-pressure components are all sealed, which is inconvenient to open detection directly. After opening, the packaging needs special equipment. High pressure failure is manifested as different machine failures. The following phenomenon should be considered as the fault of high tension cable 6mt.
First of all, the breakdown of the high tension cable 6mt itself, mostly occurs in the repeated bend of the high tension cable 6mt. The other is high voltage connector breakdown. The third is the cable conductor open circuit, occurs in the cable conductor and high-voltage plug welding place. The reason for the failure is that the high voltage of the machine exceeds the tolerance voltage of high tension cable 6mt. Production quality, cable core cable to see the road more quality issues.Due to the repeated movement of the ball tube and the repeated bending of the end of the high-voltage cable, the bending performance becomes worse.
Properties of insulating materials.

Newheek high tension cable 6mt can provide you with troubleshooting service. One is offline detection, use insulation tester (shake table) to measure insulation resistance, use multimeter to measure lead on and off. The other is replacement test, with a pair of new cable replacement test.
Our high tension cable 6mt can meet your different requirements.