Everyone is curious about how to deal with the sparking problem of the high-voltage cable of the X-ray machine. The following editor will talk about how to deal with the sparking problem of the high-voltage cable of the X-ray machine.
First of all, let me popularize the knowledge of high-voltage cables for X-ray machines: high-voltage cables are a type of power cables, which refer to power cables used to transmit power between 1kv-1000kv, and are mostly used in power transmission and distribution. How to deal with the ignition problem of the X-ray machine high-voltage cable? The first thing to do is to stop using it immediately, shut down the equipment, and purchase a new high-voltage cable of the same specification for maintenance and replacement. Remember that repairing or reconnecting without permission is prohibited. Be sure to choose a high-voltage cable with the same specification and parameters, otherwise it may cause malfunction. Use, be sure to replace it according to the specifications after receiving it, remember to apply lubricating insulating silicone grease to the plug position, and a black insulating washer is on the plug when it leaves the factory, the purpose is to prevent the plug from arcing, align the contact position, insert the socket, and use a little force , so as not to insert it in place and cause the pressure ring to be unable to be tightened. After the two plugs are installed, turn on the test to see if it returns to normal.
If you want to buy high voltage cables for X-ray machines, please contact us at (whatsapp): +8617616362243!