X-ray High Voltage Cables-3 Conductor with Special Connector NK90kVDC - Newheek X ray Cable

X-ray High Voltage Cables-3 Conductor with Special Connector NK90kVDC


Specs & Dimensions

Construction

1. HV Cable Connector Diagram        X-ray High Voltage Cables-3 Conductor with Special Connector NK90kVDC

HV cable with special connector

2. HV Cable Section Plan Diagram        X-ray High Voltage Cables-3 Conductor with Special Connector NK90kVDC

china hv cable x ray machine

3. Plug Body Section Plan Diagram        X-ray High Voltage Cables-3 Conductor with Special Connector NK90kVDC

china x ray high voltage cable

Specification

Table 1: HV Cable Spec. Refer to HV Section Plan Diagram

x-ray machine cable manufacturers

Continued Table1

oem medical cable free sample

Table 2: HV Cable Plug Body Spec. Refer to Plug Section Plan Diagram

x ray high voltage cable assemblies manufacturers

Table 3: Other

x ray high voltage cable assemblies

Technical Requirement

HV Cable sheath appearance should be smooth, uniform diameter, with no joint, bubble, bumps and other undesirable phenomena.
Weave shield density is not less than 90%.
The minimum thickness of the cable insulation and sheath must be 85% more than the nominal thickness.
Insulation between the core and the insulated wire, insulation between the core and the ground cable should be able to withstand the AC 1.5KV and keep 10 minutes can not been broken down.
Insulation between the core and the shield should be able to withstand the DC 90 KV and keep 15 minutes can not been broken down.
The DC resistance of the conductor and ground cable not more than 11.4 + 5%Ω/m.
The insulation resistance of the insulation core wire not less than 1000MΩ·Km.
The plug body should be able to withstand not less than 1000 times fallen off experiments with no damage.
The surface of each plating should be clean and bright.
The cable and each part should meet Rohs 3.0 relative requirement. Brass is below 0.1wt.
The cable and each part should meet Reach relative requirement.

Use Conditions

When the cable is used, the bending radius should not less than 66mm.
The cable using temperature: -40℃~70℃.
The cable rated voltage: 90KVDC

 
 
Certificate EMC
 
x ray high voltage cable assemblies suppliers

 
Certificate ROHS
 
x-ray machine cable suppliers

Can you provide the sample test?

Yes, of course. In order to ensure our product meet your quality or other detail requirement, we would like to offer you one free sample for test.

What is the delivery time?

Normally 15 days. We are glad that you can tell us more information about what you need. Then check the date of manufacturing in factory.

What is the payment term you use?

Mainly we use 100%T/T before delivery. Other payment terms please let us know.

Can you make HV cables as customer requirements? Can you make OEM HV cables?

Yes, of course. We can make the specification as you need. OEM HV cables is also available. We can print your brand name on HV cables.