There are Spanish customers inquiring about high-voltage cables. Let me share with you the 75KV and 90KV high-voltage cables produced by our company.
The high-voltage cable connects the high-voltage generator and the X-ray tube in large and medium-sized x-ray machines. The 75KV high-voltage cable is mainly used to connect the tube and generator with 125KV tube voltage, and the 90KV high-voltage cable is used to connect the tube and generator with 150KV tube voltage. There are two connection methods, straight and elbow, and any length can be customized.
The conductor of the high-voltage cable is tin-plated copper, which is not easy to oxidize, and the nominal cross-section is 1.8mm². The connector of the cable configuration is a three-hole plug. Pay attention to the corresponding positions of the three holes when installing. The three holes are marked C (common end), S (small focus), and L (large focus). When the jack faces itself, the C hole is on the top, the S hole is on the left, and the L hole is on the right. If the holes are installed incorrectly, it will affect the normal use of the cable.
Also pay attention to keep the cable dry and clean at ordinary times to avoid the erosion of oil, moisture and harmful gases to avoid rubber aging.
If you have other questions about the high-voltage cable, please feel free to inquire.