A Spanish customer asked about high-voltage cables, and I want to share our 75KV and 90KV high-voltage cables with you.
The 125KV voltage bulb is connected to the power supply by a 75KV high voltage cable, and the 150KV voltage bulb is connected to the power source by a 90KV high voltage cable.
The high-voltage cable connector plug is a three-hole type, which should be inserted into the corresponding position of the three-hole during installation. There are three small holes (left) and three small focal points. When you face it, the C hole is on the top, the S hole is on the left, and the L hole is on the right. If the installation position is wrong, the high-voltage cable will not work properly.
At the same time, we recommend filling the high-voltage cable joints with silicone grease, injecting the insulating layer and filling the gap. This can reduce the discharge of high voltage to the shell, so as to extend the service life of the high voltage cable.
If you are interested in our products, please contact us.