The high-voltage cable is also called HV cable or HV cable or HV wire.
High-voltage cable in large and medium-sized X-ray machine, connect high-voltage generator and X-ray tube, high-voltage generator output to the two poles of X-ray tube, filament heating voltage to X-ray tube filament. High-voltage cables generally have 75KV and 90KV, of which 75KV to Ya cables for 125KV tubular X-ray machine, 90KV high-voltage cable for 150KV tubular X-ray machine, 75KV high-voltage cable can also be used for 150KV tubular X-ray machine, but will shorten the service life of high-voltage cable, generally not recommended. Newheek’s high-voltage cable is divided into straight and elbow, can be used in various types of X-ray machine, a wide range of uses, length can be customized according to customer needs.
In addition, attention should be paid to prevent excessive bending in high-voltage cables. The bending radius should not be less than 5-8 times the diameter of the cable, so as not to cause cracks and reduce the insulation strength. Usually we should keep the cable dry and clean, avoid oil pollution, moisture and harmful gas erosion, so as to avoid rubber aging and other conditions.