While X-ray tube cables are the bridge between the power supply equipment and the electric equipment, they serve as the cables while transmitting electric energy.
Due to the extensive application, high voltage cable faults often occur, thus we briefly analyzed the causes of common problems while X-ray tube cables were out. According to the causes of faults, they are roughly divided into the following categories: manufacturer’s manufacturing reasons, construction quality reasons, design unit’s design reasons and external force failure.

Therefore, while using X-ray tubes out, you should guard against overbending. And the bending radius of the high voltage cable should not be less than 5-8 times of the cable diameter, so as not to cause cracks and reduce the insulation strength.
Normally, please keep X-ray tube cables dry and clean to avoid oil, moisture and harmful gas corrosion, so as to avoid rubber aging.
While Newheek x ray tube cables also provide quality testing service.