X-ray tube high voltage cable plug
The front end of the X-ray tube high voltage cable plug is equipped with 3 copper pins connected to the socket, and there are wiring holes on the pins for welding the core wires of the cable. The inner end of the plug is inlaid with a copper bell mouth to be welded with the metal shielding layer of the X-ray high-voltage cable to form a good grounding. X-ray tube high-voltage cable plug: its pin is die-casted on the side of the head end of the tube high-voltage cable plug, and the root part of the pin is provided with a small lead hole for passing the conductive core wire and welding the conductive core wire At the root of its pin, in order to match the tube high-voltage cable plug, the bottom of the X-ray high-voltage cable socket will be provided with three copper terminals matching the high-voltage plug, and each terminal will have a round hole to supply high voltage. The pins of the plug are inserted. In order to improve its insulation strength, the gap between the X-ray high-voltage cable and the tube high-voltage cable plug must be filled with high-voltage oil. The bottom of the tube high-voltage cable plug is also provided with a metal bell mouth, the purpose of which is to improve the electric field distribution of the grounding deduction and prevent the wiring between it and the ground from being too dense.
If you want to get a sample of high voltage cable, please contact us. firstname.lastname@example.org