A customer consult the straight high-voltage cable - Newheek X ray Cable

A customer consult the straight high-voltage cable

A customer consult the straight high-voltage cable from China Shanxi and said that the high-voltage cable head of the connecting tube on the X-ray machine was broken. You need to change one. Ask us if we can do it. I said yes. Yes, let’s take a look at some knowledge of straight high-voltage cables!
The high-voltage cable is connected to the high-voltage generator and the x-ray tube head in the large and medium-sized x-ray machine. The function is to send the high voltage output by the high voltage generator to the two poles of the x-ray tube, and send the heating voltage of the filament to the filament of the x-ray tube.
The structure of high-voltage cable: there are two types of coaxial line (concentric circle type) and non-coaxial type (non-concentric circle type) according to the arrangement of concentric lines
Precautions for using high-voltage cables:
Prevent excessive bending. The bending radius should not be less than 5-8 times the cable diameter to avoid cracks and reduce the insulation strength. Always keep the cable dry and clean to avoid the erosion of oil, moisture and harmful gases to avoid aging of the rubber.
 straight high-voltage cable