Newheek specializes in the production of various lengths of 75 kV high-voltage cables and 90 kV high-voltage cables, which can be used in large, medium and small X-ray machines connected with high-voltage generators. The function of high-voltage cables is to transfer high-voltage to the anode and cathode of X-ray tubes, and transfer the heating voltage to the filament of X-ray tubes.

The core of high voltage cable is filled with epoxy resin and PBT plug, which has high insulation performance and can be tested under high voltage.

Newcreek high voltage cables are divided into 8m, 10m, 12M, 15m and 20m. At the same time, we also accept the customer’s customization of different line lengths (2m, 4m, 5m, 6m… 50m). Our products are exported to Europe, America, Asia, Africa and Latin America,

The picture below shows the delivery picture of our company:

Attention to the use of cables:

(1) The bending radius should not be less than 5-8 times of the cable diameter to avoid cracks and reduce the insulation strength.

(2) Please keep the cable dry and clean in normal time. The temperature of cable is 40 ~ 70 ℃. Avoid the erosion of oil, moisture and harmful gases to avoid rubber aging.

(3) Rated voltage of cable: 75KV DC.

In addition, our company specializes in the production of vertical film holder, X-ray machine, hand brake, foot brake, beam light device and other parts. At present, our products are exported to Europe, America, Africa and the Middle East, which are highly praised by customers from all over the world. In addition, our company specializes in the production of various vertical and mobile chest frames, various types of X-ray machine parts, welcome to contact info@xraycable.com !