The 2m high voltage cable is connected to the high voltage generator and the X-ray tube head in the large and medium-sized X-ray machines. The function is to send the high voltage output from the high voltage generator to the two poles of the X-ray tube, and the filament heating voltage to the filament of the X-ray tube.
The material of 2m high voltage cable is mainly wrapped by rubber skin, which plays a protective role in the inner core of 2m high voltage cable. Once the rubber skin of high-voltage cable is damaged and the inner core of 2m high voltage cable leaks out, the inner core of high-voltage cable is easy to be damaged or potential safety problems occur.
Therefore, in the process of using 2m high voltage cable, we should pay attention to the following problems:
Prevent excessive bending of 2m high voltage cable. The bending radius of 2m high voltage cable should not be less than 5-8 times the diameter of 2m high voltage cable, so as to avoid cracking and reduce insulation strength. Usually to keep the cable dry and clean, to avoid oil pollution, moisture and harmful gas erosion, so as to avoid rubber aging.
The Newheek high voltage connector is used for 2m high voltage cable.