The connection of high voltage cable 150kv - Newheek X ray Cable

The connection of high voltage cable 150kv

In the process of using the high voltage cable 150kv, some matters should be paid attention to. Many people do not pay attention to the environmental location and dust situation of the x ray high voltage connector. In fact, for the long-term operation of high voltage cable 150kv, moisture and small impurities are very harmful. Therefore, it is necessary to pay attention to environmental humidity and dust during connection and clean up the environment before construction.
high voltage cable 150kv
Before the connector of high voltage cable 150kv, the cable should be adjusted straight. Sometimes operators think the cable is not bent. This view is not true. There are two reasons for the heating adjustment of the high voltage cable 150kv. One is to eliminate the mechanical stress caused by the cable’s internal distortion when laying the cable. Therefore, the cable must be heated and straightened before the cable connection.
Secondly, insulation shielding end treatment is the most important step in the work of high voltage cable 150kv connector, which has the highest technical and technological requirements.
Newheek high voltage cable 150kv and 90KV respectively, and you can also customize the length.