A Spanish customer enquired about high voltage cables, I would like to share our 75KV and 90KV high voltage cables with you.
75KV high-voltage cable is used to connect 125KV voltage ball tube with electricity supply, 90KV high-voltage cable is used for connection 150KV voltage ball tube with electricity supply.
High-voltage cable connector plug is three-hole .When installing the connector plug,should insert it to the corresponding position of the three holes. Three holes were marked C (public side), S (small focus), L (large focus). when you face to it,the correction is as below, C hole is on the top, S hole is on the left, L hole is on the right. If the installation position is wrong,the cable cannot work correctly .
At the same time ,we suggest filling the silicone grease injection insulation in the joint and cramming the gap.This can reduce the high voltage to shell discharge, in order to extend the service life of high-voltage cable.