The 6m high voltage cable is used for suspending X-ray machines - Newheek X ray Cable

The 6m high voltage cable is used for suspending X-ray machines

The 6m high voltage cable is actually resistant to high pressure. It is connected with the X-ray tube and the high pressure generator, providing high pressure for the suspension X-ray machine. The suspension X-ray machine meets the requirements of complex clinical positioning, and can be used for photography of vertical position, horizontal position, sitting position and various projection angles. Flexible mobile photographic flat bed brings convenient operation to clinical application.Structure of Newheek 6m high voltage cable: there are two ways of arrangement of coaxial and non-coaxial cable according to the centerline, which are divided into 6m, 8m, 12m, 15m and 20m according to the length.
As the suspended X-ray machine is relatively large, it generally USES a longer 6m high voltage cable, which can meet various demands. When using 6m high voltage cable, care should be taken to prevent excessive bending.The bending radius shall not be less than 5-8 times of cable diameter to avoid cracks and reduce the insulation strength.
Newheek 75KV and 90KV 6m high voltage cable are respectively suitable for different types of X-ray machines.The 75KV’s 6m high voltage cable can also be used for 150KV X-ray machines, but Newheek doesn’t recommend it for longer service life. The 6m high voltage cable of 90KV cannot be used in the X-ray machine of 125KV. To keep the X-ray machine in good condition.
6m high voltage cable


(+86) 18953613955
service@newheek.com