X-ray high voltage cable replacement process of X-ray machine
How much do you know about the high-voltage cable replacement process? Today I will explain to you:
X-ray high-voltage cables are also called high-voltage cables, which connect the tube and the high-voltage generator. There are currently two types of X-ray high voltage cables, one is 75KV and the other is 90KV
75KV means that the high-voltage value at one end of the cable is 75KV, and a high-voltage cable is divided into two ends, that is to say, the value of the entire high-voltage cable is 75KV*2=150KV. Similarly, 90KV means that the high-voltage value at one end of the cable is 90KV. The value of a cable is 180KV.
The 75KV X-ray high voltage cable is suitable for 125KV X-ray machines, where 125KV refers to the high voltage resistance of the tube. The same 90KV X-ray high-voltage cable is suitable for 150KV X-ray machines.
Precautions for the replacement process of the high-voltage cable of the x-ray machine: Before using the high-voltage cable of the x-ray machine, all the high-voltage cables of the x-ray machine need to be wiped clean with alcohol. The plugs and sockets must be coated with high-voltage insulating silicone grease. The purpose of this is to prevent dirt. Something causes electrical discharge.
After wiping clean, you can unplug the old X-ray machine high-voltage cable, and insert the new X-ray machine high-voltage cable in the original way.
That’s it for today’s sharing. Our company specializes in producing various types of X-ray machines and X-ray machine parts such as vertical/mobile chest radiograph holders, X-ray exposure hand brakes, photographic flat beds, image intensifiers, and X-rays. High-voltage cables, beam beams, etc. Products are exported to Europe, America, Africa, Middle East and other regions, and are well received by customers from all over the world. If you have similar projects, please come to consult, and we will contact you as soon as we receive the information.