Is the high-voltage cable leaking of the x-ray machine and the cable needs to be replaced? need. To avoid the risk of fire, please replace the cable as soon as possible. How to replace the high-voltage cable of the x-ray machine? The high-voltage cable of the x-ray machine is too long, the line resistance is about 1 ohm, the power of the high-pressure sodium lamp is large (no power data is given), and it is an inductive ballast, the power factor is low, the line loss voltage drop is large, it should be at the end Add a parallel capacitor nearby to improve the power factor, which can reduce line loss and increase the voltage slightly.
For the customization of X-ray machine high-voltage cables, it is necessary to verify the withstand voltage value and length of the plug, core, wire, and other conditions. These conditions are indispensable. If a special style of X-ray machine high-voltage cable is customized, there are additional length or quantity restrictions. Because of the need for separate modeling, the cost of mold opening is not generally high, basically 500m or 300 pieces (≥3m each) can be individually customized for special specifications.